Profiles & Packs

Tailored to your project!

The profiles and panels have a length of 300 cm. You can easily cut these to the desired length. The 2-line panels are also available with a length of 250 cm. That avoids waste.

Our profiles

With this profile range, any give can be covered, including inside and outside 90° corners.

Scroll horizontally ->

Outside corner profile

Inside corner profile

1-line profile

2-line profile

Base clip

Stop profile

Trim clip

Start profile

L-profile

✅ Separately available

Flat start profile

✅ Separately available

Individual profiles

Additional profiles, to finish your design according to your vision. Sold individually in the DIY shop.

L-profile

The L-profile can be used to finish the top, bottom or side of your cladding. It provides your facade with an even sleeker look, plus water is prevented from getting behind your cladding when you mount an L-profile on top. A win-win situation!
Length: 300 cm (60’’)

Flat start profile

Sometimes the wall you wish to clad with Cladix has to connect to another type of wall or one with a different type of cladding. No problem! The flat start profile is made to provide a flawless transition between different facade elements. This ensures a seamless connection.
Length: 300 cm (60’’)

Our packs

Use our calculator to calculate the exact quantities and packs you’ll need.

Start-stop pack

The installation of Cladix follows a fixed sequence. You always start by installing the start profile on the support structure. The first trim clip is then placed on top. Then, depending on the length and shape of the façade, you can start installing the profiles from the other packages. You finish with a stop profile. When installing the stop profile, the base clip is installed first, followed by the second trim clip.

The 2 line fill pack is the largest pack and will provide the greatest coverage of the façade. Each profile has a width of 160mm. The 1-line finishing pack is designed to cover small areas or to finish the installation at the end of the cladding. Each single line profile has a width coverage of 80mm, allowing for finer installation adjustments. The profiles in both packs have a length (height) of 3 m. In order to calculate a solution for your facade with as little overhang as possible, we have a 2.5 m version of the 2-line fill pack in our range.

Filling the space between the start and stop profiles is easy. Hook the profile into the already installed profile, taking into account the clearance that the Cladix calculation tool has calculated according to the width of your wall. Then fix the profile to the horizontal battens of the support structure with self-tapping screws. Complete the rest of your wall with the 2-line and 1-line profiles according to the calculation of our calculation tool.

Attach the corner profile to the last single or 2-line profile installed. Use the tolerance to ensure that the profile fits perfectly into the inside or outside (90°) corner of the façade. The last step is to click on the trim clip.

Pack
Length
Surface
Content
2-line fill pack
3 m
1,92 m²
4 x 2-line profiles
2-line fill pack
2,5 m
1,63 m²
4 x 2-line profiles
1-line trim pack
3 m
0,72 m²
3 x 1-line profiles
Start-stop pack
3 m
N/A
1 start-, 1 stop-, 1 baseclip and 2 trim clips
Outside corner pack
3 m
N/A
1 stop- en 1 90° outside corner profile en 1 trim clip
Inside corner pack
3 m
N/A
1 stop- en 1 90° inside corner profile en 1 trim clip

Start-stop pack

5 pieces that make your gable plane start and stop.

Length: 300cm

1 start profile
1 stop profile
2 cover clips
1 base clip

1-line trim pack

3 pieces x 80 mm coverage to facade area.
Length: 300 cm

  • 3 1-line profiles

2-line fill pack

4 pieces x 160 mm coverage to facade area.
Length: 250 cm

  • 4 2-line profiles

Inside corner pack

3 pieces to make an inside corner.
Length: 300 cm

  • 1 inside corner profile
  • 1 trim clip
  • 1 stop profile

Outside corner pack

3 pieces to make an outside corner.
Length: 300 cm

  • 1 outside corner profile
  • 1 stop profile
  • 1 cover clip